The Siemens Circuit Breaker 10kA 1P+N C 4A is part of Siemens' 5SY4 series, developed to protect electrical installations from overload and short circuit. It has a 10 kA breaking capacity and a C curve, making it suitable for general circuits with moderate inrush currents.

The fuse is 1+N pole and intended for 230 V installations. The compact design, with an installation depth of 70 mm, makes it easy to integrate into standardised electrical panel systems. It is mounted on a DIN rail and can be combined with various accessories such as remote control devices, residual current modules, and signal modules.

The product is manufactured in accordance with the IEC 60898 standard, ensuring compatibility and safety in low-voltage installations. This makes it suitable for domestic, commercial, and industrial environments where reliability and flexibility are required.

The Schneider Electric Acti9 iC60N circuit breaker is designed to protect electrical circuits from both short-circuit currents and overloads. It has four poles (3P+N) and a rated current of 32 amperes, making it suitable for various low-voltage installations.

The circuit breaker has a C-curve, meaning it reacts quickly to short circuits while allowing short-term inrush currents from motors and similar loads. The double terminal allows separate connection of both cable and busbar, making installation and maintenance easier.

With the VisiTrip™ indicator, faults can be located quickly, as the visual marker on the front shows which unit has tripped. The VisiSafe™ function ensures that the circuit is completely disconnected when the switch is in the open position, increasing safety during installation work.

The device is compactly designed, 72 mm wide, and meets the requirements of both IEC/EN 60898-1 and IEC/EN 60947-2 standards. The terminals are IP20B protected, reducing the risk of contact with live parts during installation and operation.

The Eaton circuit breaker 16A 3P+N C 4M 6KA is a compact and efficient protective device that safeguards electrical circuits from overloads and short circuits. It is intended for use in both residential and commercial installations where reliability and safety are required.

The breaker features a C-curve, meaning it is suitable for circuits with moderate inrush currents, such as lighting, sockets, and small motors. The four-pole design (3P+N) makes it suitable for three-phase systems with a neutral conductor.

With a breaking capacity of 6 kA and a rated current of 16 amperes, it provides stable and safe disconnection under fault conditions. The product is modularly built with a four-module (4M) structure, making it easy to install in standard panels.

The Hager circuit breaker 3P+N 50A C characteristic is a four-pole circuit breaker designed for use in electrical panels and distribution boards. It protects electrical circuits from overcurrent and short circuit and is suitable for installations requiring both phase and neutral conductor disconnection.

The breaker has a rated current of 50 amperes and a C characteristic, meaning it reacts quickly to short circuits but allows short-term inrush currents, for example from motors. It is rated for a breaking capacity of 6 kA and occupies four module spaces (4M) in the panel.

The product is part of Hager's range of modular protection components, known for their reliability and compatibility with standardised panel structures.

The ABB S202-C6 is a 2-pole circuit breaker with a C-characteristic, developed to protect electrical circuits from overcurrent and short circuit. Its rated current is 6 amperes and breaking capacity 6 kA according to the EN60898 standard.

The fuse is intended for use in 230/400V AC installations and can also handle up to 60V DC per pole. It is designed to operate reliably in a temperature range of -25 °C to 55 °C, making it suitable for both residential and industrial environments.

With a width of 35 mm and an installation depth of 68 mm, it fits a standard 35 mm DIN rail. The product has IP20 protection and belongs to protection class III, providing a safe and reliable level of electrical insulation.

The circuit breaker is part of ABB's S200 series, known for its modular design and ease of use. It can be used in electrical panels where precise and fast disconnection is required in the event of a fault current.

The Siemens Circuit Breaker 6kA 1P C 10A is a compact and durable protective switch designed to protect electrical circuits from overload and short circuit. Its breaking capacity is 6 kiloamperes, and it is intended for use in 230/400 V AC systems.

The circuit breaker is single-pole and has a C-curve, which means it is suitable for circuits with moderate inrush currents, such as lighting and standard sockets. The rated current is 10 amperes, making it suitable for standard installations in both residential and commercial environments.

With an installation depth of 70 mm, it fits most distribution systems and can be easily integrated into existing installations. Siemens' design ensures stable and reliable operation over time.

The Schneider Electric Acti9 iC60N 3P 32A is a circuit breaker designed to protect electrical circuits from both short-circuit and overload currents. It has three poles and a rated current of 32 amperes, making it suitable for various low-voltage installations.

The breaker has a C-curve, meaning it reacts quickly to high currents but allows short-term inrush currents from motors and similar loads. The double terminal design allows separate connection of both cable and busbar, making installation and maintenance easier.

The Acti9 series is equipped with a VisiTrip™ indicator that shows if the device has tripped, and a VisiSafe™ function that increases safety when working in the distribution board. The terminals are IP20B protected to prevent accidental contact with live parts.

The product meets international standards such as IEC/EN 60898-1 and IEC/EN 60947-2 and is manufactured in accordance with the RoHS directive. With a width of 54 mm and a weight of 375 g, it is compact and easy to integrate into existing distribution board systems.

The Eaton Circuit Breaker 32A 3P+N C 4M 6KA is a compact and efficient protective device that safeguards electrical installations from overloads and short circuits. It is intended for use in residential, office, and commercial buildings where operational reliability and safe disconnection are required.

The breaker has a C characteristic, meaning it is suitable for circuits with moderate inrush currents, such as lighting, sockets, and small motors. The four-pole design (3P+N) makes it suitable for three-phase systems with a neutral conductor.

With a breaking capacity of 6 kA and a rated current of 32 amperes, it provides stable and safe protection against electrical faults. The product is modularly constructed and fits standard DIN rail panels, making installation easy and flexible.

The Hager circuit breaker 3P 16A C type 6kA is a three-phase circuit breaker used to protect electrical installations from overcurrent and short circuit. It is intended for AC systems with a voltage of 230–400 volts.

The breaker has a C-type characteristic curve, which means it is suitable for circuits with moderate inrush currents, such as lighting, sockets, and small motors. The rated current of 16 amperes makes it suitable for typical loads in domestic and commercial installations.

With a breaking capacity of 6 kA, it can handle short-term fault currents without damage, and its modular design makes it easy to install in standard distribution boards. The product is supplied as a single unit and is part of Hager's range of modular protection components.

The Siemens 5SY6640-7 is a miniature circuit breaker used to protect electrical circuits from overload and short circuit. It is designed to handle a rated current of 40 amperes and has a breaking capacity of 6 kiloamperes in accordance with the EN 60898 standard.

The fuse is a four-pole model (3P+N), making it suitable for three-phase installations with a neutral conductor. It can be used in both commercial buildings and industrial environments where operational reliability and standardised protection are required.

The device is halogen-free and meets the requirements for main switches according to the EN 60204-1 standard, making it suitable for use in machine installations and electrical panels where safety and material choices are crucial.

The Schneider Electric Acti9 iC60N 2P 32A is a circuit breaker that protects electrical installations from both short-circuit and overload currents. It is designed with double terminals that allow separate connection of both cable and busbar, making installation and maintenance easier.

The breaker has a C-curve and a rated current of 32 amperes at 230 volts. Its short-circuit breaking capacity is 6/10 kA, making it suitable for a wide range of standard building and distribution board installations.

The product is equipped with Schneider Electric's patented VisiTrip™ indicator, which shows if the device has tripped, and the VisiSafe™ function, which increases safety during maintenance. The terminals are IP20 protected to prevent accidental contact with live parts.

The Acti9 iC60N series complies with both IEC/EN 60898-1 and IEC/EN 60947-2 standards, ensuring compatibility and reliability in professional electrical installations.

Hager circuit breaker 1P 16A C type 6kA is a single-pole fuse that protects electrical circuits from overload and short circuit. It is intended for installation in distribution boards and is suitable for both residential and commercial premises.

The fuse has a rated current of 16 amperes and a C-type characteristic curve, which means it can withstand moderate inrush currents from, for example, motors or lighting systems without unnecessary tripping.

Thanks to its 6 kA breaking capacity, it can safely interrupt large short-circuit currents, and it is designed to operate at 230–400 volts AC. The device occupies one module space in the panel (1M).

The product is part of Hager's range of modular protection components, known for their reliability and ease of use with standard DIN rails.

The Siemens 5SY6632-7 is a miniature circuit breaker from the SENTRON series, developed to protect electrical installations from overload and short circuit. It has a breaking capacity of 6 kA and is designed for 400V systems.

The fuse is 3+N-pole and has a rated current of 32 amperes with a C-curve, making it suitable for circuits with moderate inrush currents, such as motors and lighting systems.

The device has an installation depth of 70 mm and is designed with a uniform modular structure, making installation and expansion with accessories easy as needed.

Thanks to its robust construction and Siemens' renowned quality, this circuit breaker ensures stable and safe operation in a wide range of electrical installations.

The Schneider Electric C120N 3P 100A is a three-phase circuit breaker used to protect electrical circuits from short-circuit and overload currents. It is designed to meet IEC/EN 60947-2 requirements and is suitable for industrial environments.

The breaker has a rated current of 100 amperes and a C characteristic, meaning it reacts quickly to large current surges but allows short-term inrush currents from motors and similar loads.

Thanks to its 10 kA breaking capacity at 230/400 V voltage and IP20 protection, it is suitable for installations requiring both safety and reliability. In addition, auxiliary devices can be connected for fault tripping and indication.

Compact dimensions, width 81 mm, height 73 mm, and weight 615 g, make it easy to integrate into distribution boards and systems.

The Siemens Circuit Breaker 230V 10kA 1+N-P C 16A is designed to protect electrical systems from overcurrent and short circuit. It belongs to Siemens' 5SL series, known for its reliability and ease of use in modular distribution boards.

The breaker has a rated current of 16 amperes and a breaking capacity of 10 kiloamperes, making it suitable for both residential and small commercial installations. It uses a C-curve, which means it reacts quickly to short circuits but allows short-term inrush currents, for example from motors.

Thanks to its 1+N-pole design, it protects both phase and neutral, and it can be combined with additional modules such as auxiliary contacts, fault indicators, or remote tripping devices. This makes it flexible in use and easy to adapt to different installation needs.

The circuit breaker is designed to be compact, fits standard DIN rail distribution boards, and is made from materials that ensure long service life and stable operation under varying loads.

The Schneider Electric Acti9 iC60N circuit breaker is designed to protect electrical circuits from both short circuits and overloads. It has 3 poles and neutral (3P+N) and is rated at 10 amperes at 230 volts.

The device has a C characteristic curve, making it suitable for circuits with moderate inrush currents, such as standard installations and smaller motor loads.

The circuit breaker features double terminals that allow separate connection of cable and busbar. This facilitates installation, maintenance, and replacement in panels.

With the VisiTrip™ indicator, faults can be quickly located, while the VisiSafe™ function increases safety by showing when the circuit is completely disconnected. The terminals are IP20B protected to prevent accidental contact with live parts.

The product meets international standards IEC/EN 60898-1 and IEC/EN 60947-2 and is manufactured in accordance with the RoHS directive.

The Siemens Circuit Breaker 10kA 1P+N C 6A belongs to Siemens' 5SY4 series, developed to protect electrical circuits from overload and short circuit. It has a 10 kA breaking capacity and a C curve, making it suitable for general installations with moderate inrush currents.

The breaker is 1+N pole and intended for 230 V installations. Its compact design, with an installation depth of 70 mm, makes it easy to integrate into standardised electrical distribution systems. It is mounted on a DIN rail and can be combined with various accessories such as remote control devices, residual current modules, and signal modules.

The circuit breaker is manufactured in accordance with the IEC 60898 standard, ensuring compatibility and safety in low-voltage installations. It is suitable for residential, commercial, and industrial environments where operational reliability and fast disconnection in the event of a fault current are required.

The Schneider Electric Acti9 iC60N 1P+N 4A is a circuit breaker designed to protect electrical circuits from both short-circuit and overload currents. It uses a C-curve, making it suitable for standard installations with moderate inrush currents.

The breaker has double terminals that allow separate connection of both cable and busbar. This facilitates installation, maintenance and possible replacement. The terminals are IP20 protected, reducing the risk of accidental contact with live parts.

The product is equipped with Schneider Electric's patented VisiTrip™ technology, which provides a visual indication on the front when the device has tripped due to a fault. At the same time, the VisiSafe™ function increases safety during maintenance of the installation.

The Acti9 iC60N series complies with both IEC/EN 60898-1 and IEC/EN 60947-2 standards, ensuring compatibility and reliability in professional electrical installations.